CreatBot/CreatBotMainsail
11
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
CreatBotMainsail/docs/quicktips/slicer-upload.md
Stefan Dej b1345d09fa add moonraker octoprint_combat and add cura fileupload in docs 
Signed-off-by: Stefan Dej <meteyou@gmail.com>
2021-03-05 12:40:47 +01:00

1.2 KiB
Raw Blame History

layout title parent permalink description
default Slicer Upload Quicktips /quicktips/slicer-upload It is possible to upload G-Code from your slicer and have it start printing.

{{ page.title }}

{{ page.description }}
Moonraker has compatibility with Octoprint's API. To enable octoprint api compatibility, add the following to your `moonraker.conf and restart Moonraker.

[octoprint_compat]

PrusaSlicer/SuperSlicer (prior to v2.3.0)

If not already been done, switch to advanced or expert mode and set the options under Printer Settings / General as shown in the screenshot below. For "API Key" you can type anything.

screenshot

PrusaSlicer/SuperSlicer (since v2.3.0)

A "Physical Printer" must be defined to configure the settings from above.
More detailed instructions will follow.

Cura with OctoPrint-Connect

Install the OctoPrint-Connection plugin via Marketplace. In Settings > Printer > Manage Printers... you can find the Button Connect OctoPrint. Add your printer and type anything in the API Key field.

screenshot