964ae7986f
Also configuration file clarifications, and other minor updates. Co-authored-by: jordanruthe <31575189+jordanruthe@users.noreply.github.com>
2.0 KiB
Panels
Main Menu
Job Status
Bed Level
type: bed_level
The bed level panel has the ability to have preset locations from Klipper. Please see documentation on the following Klipper Sections:
Important Note: Due to Klipper using the bltouch/probe offsets in screws_tilt_adjust, if a bltouch/probe is enabled KlipperScreen will add the offset to the defined screw values. This will not occur if bed_screws section is used.
This panel will favor screws_tilt_adjust over the bed_screws section. If screws_tilt_adjust is defined, an extra button for Screws Calibrate will appear. This button runs the SCREWS_TILT_CALCULATE command and shows the results on the panel.
Bed Mesh
type: bed_mesh theme:material-dark
Extrude
type: extrude theme:material-dark
Fan
type: fan
Fine Tune
type: fine_tune theme:custom
Gcode Macros
type: gcode_macros theme: material-darker
Menu
type: menu
Move
type: move
Network
type: network
Power
type: power
Preheat
type: preheat
type: print
Settings
type: settings theme:colorized
System
type: system
Temperature
type: temperature theme:material-light
Z Calibrate
type: zcalibrate
Limits
type: limits theme: material-dark
