8a8c6c064c
* Graph in temp panel, combine preheat and temp * Fix target not working properly * Fix initial preselect * Add the ability to change in delta temps * Make the label translatable * Add Unit to the label * Add de/select button to popover * Warn the user if nothing was selected * Fix templabel * Fix to comply with pep8 * Fix colors, thanks Jordan * Fix popover selection * Update docs image * Gain horizontal space * Gain even more horizontal space (remove target) * Fix temperature_fan * Add icon and style to temperature_fan * List preheat deprecation in breaking changes * Use the printer maximum temperature * Cleanup target and fix popover select * Fix codestyle * Add extra preheat presets * Change Class name * Update docs image * Improve Maximum temperature handling and Temperature fans
100 lines
1.9 KiB
Markdown
100 lines
1.9 KiB
Markdown
# Panels
|
|
|
|
### Main Menu
|
|
|
|
|
|
### Job Status
|
|
|
|
|
|
### Bed Level
|
|
type: bed_level
|
|
|
|
|
|
|
|
The bed level panel has the ability to have preset locations from Klipper. Please see documentation on the following
|
|
Klipper Sections:
|
|
* [bed_screws](https://www.klipper3d.org/Config_Reference.html#bed_screws)
|
|
* [screws_tilt_adjust](https://www.klipper3d.org/Config_Reference.html#screws_tilt_adjust)
|
|
|
|
_Important Note: Due to Klipper using the bltouch/probe offsets in screws_tilt_adjust, if a bltouch/probe is enabled_
|
|
_KlipperScreen will add the offset to the defined screw values. This will not occur if bed_screws section is used._
|
|
|
|
This panel will favor screws_tilt_adjust over the bed_screws section. If screws_tilt_adjust is defined, an extra button
|
|
for _Screws Calibrate_ will appear. This button runs the SCREWS_TILT_CALCULATE command and shows the results on the
|
|
panel.
|
|
|
|
### Bed Mesh
|
|
type: bed_mesh theme:material-dark
|
|
|
|
|
|
|
|
### Extrude
|
|
type: extrude theme:material-dark
|
|
|
|
|
|
|
|
### Fan
|
|
type: fan
|
|
|
|
|
|
|
|
### Fine Tune
|
|
type: fine_tune theme:custom
|
|
|
|
|
|
|
|
### Gcode Macros
|
|
type: gcode_macros theme: material-darker
|
|
|
|
|
|
|
|
### Menu
|
|
type: menu
|
|
|
|
|
|
|
|
### Move
|
|
type: move
|
|
|
|
|
|
|
|
### Network
|
|
type: network
|
|
|
|
|
|
|
|
### Power
|
|
type: power
|
|
|
|
|
|
|
|
### Print
|
|
type: print
|
|
|
|
|
|
|
|
### Settings
|
|
type: settings theme:colorized
|
|
|
|
|
|
|
|
### System
|
|
type: system
|
|
|
|
|
|
|
|
### Temperature
|
|
type: temperature theme:custom
|
|
|
|
|
|
|
|
### Z Calibrate
|
|
type: zcalibrate
|
|
|
|
|
|
|
|
### Limits
|
|
type: limits theme: material-dark
|
|
|
|
|