60 lines
1.6 KiB
Markdown
60 lines
1.6 KiB
Markdown
# Thumbnails
|
|
KlipperScreen can display thumbnails in the file browser and as previews in the print status.
|
|
|
|
|
|
|
|
Recommended sizes for thumbnails:
|
|
|
|
* 300 x 300 - For the larger previews.
|
|
* 32 x 32 - For the smaller thumbnails used in lists.
|
|
|
|
!!! note
|
|
Other sizes should work, but keep in mind bigger thumbnails are slower to load and can produce bigger gcode files.
|
|
|
|
## Select your slicer:
|
|
* [PrusaSlicer](#prusaslicer)
|
|
* [SuperSlicer](#superslicer)
|
|
* [Cura](#cura)
|
|
* [ideaMaker](#ideamaker)
|
|
|
|
### PrusaSlicer
|
|
In “Expert” mode PrusaSlicer has an option in the “Printer Settings” tab to activate previews.
|
|
Under General / Firmware.
|
|
|
|
|
|
|
|
|
|
|
|
### SuperSlicer
|
|
In “Expert” mode SuperSlicer has some very convenient options in the “Printer Settings” tab to activate and customize the previews.
|
|
|
|
|
|
|
|
|
|
|
|
### Cura
|
|
|
|
#### Option #1 A post processing script (Cura 4.9+)
|
|
|
|
1. With Cura open, navigate to Extensions, Post Processing, Modify G-Code
|
|
2. Click Add a script, and select Create Thumbnail
|
|
3. Set both Width and Height to 300
|
|
4. Click Add a script, and select Create Thumbnail
|
|
5. Set both Width and Height to 32
|
|
6. Click Close
|
|
|
|
#### Option #2 A plugin (Cura 4.7+)
|
|
|
|
[Cura2Moonraker](https://github.com/emtrax-ltd/Cura2MoonrakerPlugin)
|
|
|
|
|
|
|
|
|
|
|
|
### ideaMaker
|
|
1. Open the Advanced tab in the printer settings
|
|
2. Enable "GCode Thumbnails for Octoprint and Mainsail"
|
|
3. Set both Width and Height to 300
|
|
|
|
|