48 lines
1.9 KiB
Markdown
48 lines
1.9 KiB
Markdown
# KlipperScreen
|
|
|
|
KlipperScreen is a touchscreen GUI that interfaces with [Klipper](https://github.com/Klipper3d/klipper) via [Moonraker](https://github.com/arksine/moonraker). It can switch between multiple printers to access them from a single location, and it doesn't even need to run on the same host, you can install it on another device and configure the IP address to access the printer.
|
|
|
|
### Required Hardware
|
|
|
|
KlipperScreen should run on any touchscreen that you can connect to a host (Raspberry, PC, Tablet), but not screens that connect directly to the printer MCU board.
|
|
|
|
A physical touchscreen is not strictly required, for example you may install a remote desktop server like tigervnc-scraping-server and connect from a client device, [check out the hardware page for further information.](Hardware.md)
|
|
|
|
### Sample Panels
|
|
|
|
Main Menu
|
|
|
|
|
|
|
|
Job Status
|
|
|
|
|
|
|
|
[More](Panels.md)
|
|
|
|
### Inspiration
|
|
KlipperScreen was inspired by [OctoScreen](https://github.com/Z-Bolt/OctoScreen/) and the need for a touchscreen GUI that
|
|
will natively work with [Klipper](https://github.com/klipper3d/klipper) and [Moonraker](https://github.com/arksine/moonraker).
|
|
|
|
### About the project
|
|
|
|
KlipperScreen has been created and maintained by Jordan Ruthe from 2020 to 2021
|
|
|
|
Donate to Jordan: [Patreon](https://www.patreon.com/klipperscreen) [Ko-fi](https://ko-fi.com/klipperscreen)
|
|
|
|
|
|
The current maintainer is Alfredo Monclus (alfrix) from 2021 onwards
|
|
|
|
Donate to Alfredo: [Ko-fi](https://ko-fi.com/alfrix)
|
|
|
|
thanks to all the [contributors](https://github.com/KlipperScreen/KlipperScreen/graphs/contributors) who helped along the way.
|
|
|
|
|
|
### Sponsors
|
|
|
|
|
|
|
|
Thank you [LDO](https://ldomotors.com/) for sponsoring KlipperScreen and the open source community.
|
|
|
|
Thanks YUMI 3D-EXPERT.FR for sponsoring KlipperScreen and the open source community.
|