1.4 KiB
KlipperScreen
KlipperScreen is touchscreen GUI for Klipper based 3D printers. KlipperScreen interfaces with Klipper via Moonraker.
Multiple printers update is here! Please check the configuration information for specifying several printers.
Required Hardware
KlipperScreen should run on any touchscreen that you can connect to a computer. The required video driver may be slightly different depending on what model you get. KlipperScreen will scale to the resolution of the screen being used. However, three resolutions are tested during development: 1024x600, 800x480, 480x320.
There are no recommended screens, but there are several screens that work with KlipperScreen. They include screens that use HDMI/USB, Raspberry Pi GPIO, or the Rapsberry Pi DSI (ribbon cable) port.
Links
Sample Panels
Main Menu
Job Status
Inspiration
KlipperScreen was inspired by OctoScreen and the need for a touchscreen GUI that will natively work with Klipper and Moonraker.