39 lines
1.4 KiB
Markdown
39 lines
1.4 KiB
Markdown
# KlipperScreen
|
|
|
|
KlipperScreen is touchscreen GUI for Klipper based 3D printers. KlipperScreen interfaces with [Klipper](https://github.com/kevinOConnor/klipper) via [Moonraker](https://github.com/arksine/moonraker).
|
|
|
|
Multiple printers update is here! Please check the configuration information for specifying several printers.
|
|
|
|
|
|
[Changelog](docs/changelog.md)
|
|
|
|
### Required Hardware
|
|
KlipperScreen should run on any touchscreen that you can connect to a computer. The required video driver may be
|
|
slightly different depending on what model you get. KlipperScreen will scale to the resolution of the screen being used.
|
|
However, three resolutions are tested during development: 1024x600, 800x480, 480x320.
|
|
|
|
There are no recommended screens, but there are several screens that work with KlipperScreen. They include screens that
|
|
use HDMI/USB, Raspberry Pi GPIO, or the Rapsberry Pi DSI (ribbon cable) port.
|
|
|
|
### Links
|
|
|
|
[Installation](docs/Installation.md)
|
|
|
|
[Configuration](docs/Configuration.md)
|
|
|
|
[Panels](docs/panels.md)
|
|
|
|
|
|
### Sample Panels
|
|
|
|
Main Menu
|
|
|
|
|
|
Job Status
|
|
|
|
|
|
|
|
### Inspiration
|
|
KlipperScreen was inspired by [OctoScreen](https://github.com/Z-Bolt/OctoScreen/) and the need for a touchscreen GUI that
|
|
will natively work with [Klipper](https://github.com/kevinOConnor/klipper) and [Moonraker](https://github.com/arksine/moonraker).
|